Complementary Products

The majority of industrial processes based on the spraying of liquids require a large variety of
supplementary operations such as drying by means of compressed air , mixing of fluids with
Venturi eductors, heating or filtering of the liquid to be sprayed.

Our experience in the field of fluid dynamics and the continuous cooperation with a large
number of customers on the major worldwide markets, enables us to propose a range of
equipment which has not only been tested through many years of successful applications, but
is continuously updated to the most modern technical levels and to the specific needs of
modern industrial processes.

 

Product Name Typical Applications Details
papermillnozzles Shower Nozzles For cleaning suction and grooved rolls, for paper formation, for remoisturizing, for trimming paper web and for lubrication. All these operations heavily influence the product quality …which requires high quality and properly designed nozzles. See Details
spillback Hydraulic Spill-Back Lances Widely used in a number of industrial processes such as cement manufacturing, refuse incineration and cooling blast furnace gas in iron mills. See Details
air-assist Air-Assisted Lances Our air-assisted atomizing lances use the most modern technology to produce the finest atomization available. See Details
spraydrynozzles Spray Drying Nozzles Spray drying is a widely applied process in modern industry, and it is used to obtain either final or intermediate products under the form of powder in industries like food, chemical, pharmaceutical There are three types of spray techniques being used in a spray drying system, that is: See Details
descaling Descaling Nozzles Spray drying is a widely applied process in modern industry, and it is used to obtain either final or intermediate products under the form of powder in industries like food, chemical, pharmaceutical There are three types of spray techniques being used in a spray drying system, that is: See Details
feltwash Felt Washing Showers High impact disc nozzles. Easy cleaning using an internal brush and hand wheel. Internal flushing capability.
Material: 304 stainless steel.
Typical applications: washing rotary felts in paper mills.
See Details
discwash Disc Washing Nozzles (Type GE), flat spray High impact. High pressure operation (up to 300 psi).
Flow rate range @ 40 psi: 0.13 – 5 gpm. Spray angles: 0º and 60º.
Materials: 304 stainless steel.
Typical applications: felt washing in paper mills (see felt washing showers).
See Details
papersidecut Paper Side Cutter (Type UE), flat spray High impact. Forceful, straight spray. High pressure operation (up to 300 psi).
Flow rate range @ 40 psi: 0.04 – 0.7 gpm. Spray angle: 0º.
Materials: sapphire (orifice), brass (body) and 304 stainless steel (filter).
Typical applications: side-cutting operation on paper making machines.
See Details
ultrasonic Ultrasonic Nozzle Full cone air-atomizing type. Very small drops (smaller than those from any other type of air-atomizing nozzle). High noise level. Uses supersonic air pressure waves to create small drops. Flow rate range: 0.3 – 46 gph.
Spray angle: 15º.
Materials: 303 stainless steel (head), 303 stainless steel and brass (body).
Typical applications: humidification.
See Details
airnozzleround Air Nozzles, round spray Laminar stream. Limited noise.
Flow rate range: 9 – 21 cfm @ 30 – 90 psi. Materials: anodized aluminum (body), 303 stainless steel (nipple).
Typical applications: blow off, cooling, drying cleaning.
See Details
airnozzleflat Air nozzles, flat spray 16 orifices. Uniform layer of air. Limited noise. Flow rate range: 9 – 33 cfm @ 15 – 75 psi. Material: polyacetal resin.
Typical applications: blow off, cooling, drying cleaning.
See Details
lances Hot Water Wash Gun/Lances Rubber cover. Ergonomically designed trigger. Mimimizes hot water usage. Available with a variety of lances.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: nickel-plated brass casting (body), 316 stainless steel (stem and trigger), EDPM (cover).
Typical applications: washing.
See Details
highpressuregun High Pressure Spray Gun/Lances Heat resistant nylon trigger. Available with a variety of lances.
Normal flow rate: 10.5 gpm.
Pressure range: 2900 – 4050 psi.
Maximum temperature: 320º F.
Spray angle: adjustable from a straight jet to a large-angle spray.
Materials: fiberglass reinforced nylon (body), brass, 203 stainless steel, 440 stainless steel. Typical applications: high-pressure washing.
See Details
eductors Mixing Eductors (Types UPB/UPD) One-piece construction. Increases circulation rate fourfold. Flow rate range: 9 – 37 gpm (UPB); 16 – 340 gpm (UPD).
Pressure range: 15 – 75 psi.
Materials: fiberglass reinforced polypropylene or 316 stainless steel (UPB); polypropylene, 316 stainless steel or tool steel (UPD).
Typical applications: agitation of liquids in tanks where settling is unacceptable, steam heating processes in water tanks.
See Details
int_filters Internal Filters Hat-shaped with flange, cartridge and threaded types.
Materials: copper, 303 stainless steel, 316 stainless steel, brass, nylon (bodies); 304 stainless steel, 316 stainless steel (mesh). Typical applications: nozzles and nozzle tips with small orifices where clogging can be a problem.
See Details
pipeclamps Pipe Clamps Wide variety available. Fabricated from a wide range of materials.
Types: rigid, spring designs, cam and lever, ball types for variable orientation.
See Details
swiveljoints Swivel Joints Accommodate a wide variety of nozzles. Allow a wide range of orientation possibilities. Materials: 304 stainless steel, 316 stainless steel, brass. See Details
locknuts Lock Nuts Specialty types of nuts for use with various PNR products. See Details
nipples Nipples Available in a variety of configurations for use with G series nozzle tips and for other applications.
Fabricated in a wide range of materials.
See Details
quickcoupljoints Quick Coupling Joints Provide a safe and rapid means to connect pipes together.
Materials: 316 stainless steel and fiberglass-reinforced polypropylene
See Details